Electrostatic Carpet & Floor Sweeper

Small Sweeper, Big Cleanup

The Fuller Brush Electrostatic Carpet & Floor Sweeper is small, lightweight and easy to carry. It measures just 7 x 9.5 inches and weighs less than 3 pounds.

Use it for quick, everyday cleanups like crumbs, dust, pet hair, paper clips and small bits of broken glass. There's no need to pull out a heavy vacuum or a broom and dustpan.

It has no cord, no batteries and no motor, so you can use it anywhere, anytime. It's also much quieter than a vacuum. When you're done, it fits easily in a closet or corner.

How It Works

Just push the sweeper across the floor. The roller brush spins and sweeps dirt and debris into the dust compartments inside the sweeper.

On rugs and carpet, the brush also creates an electrostatic charge that helps pick up dust and hair. (The electrostatic effect works on rugs and carpet only.)

Works best on:

• Smooth hard floors
• Low-pile rugs
• Low-pile carpet

Not recommended for:

• High-pile (thick or shaggy) carpet
• Grooved, textured or rough floors
• Large amounts of hair

This sweeper is for quick cleanups between vacuuming. It does not replace a vacuum.

Two Brush Options

Every sweeper comes with a natural horsehair roller brush, which is best for everyday sweeping on rugs and carpet.

Every sweeper can also use the Fuller Vinyl Blade Rotor. This is a second roller brush that's great for hard floors, pet hair, lint and fine dust. The sweeper holds one brush at a time. The two brushes cannot be used together. Simply swap one out for the other depending on what you're cleaning.

• Gray sweeper: comes with BOTH brushes in the box: the natural horsehair roller brush AND the Vinyl Blade Rotor. It costs just $10 more than the other colors.
• All other colors: come with the horsehair brush only. The Vinyl Blade Rotor can be purchased separately for $14.99.

How to Change the Brush

1. Turn the sweeper upside down on a firm, flat surface. The brush (horsehair or vinyl) sits in the middle of the sweeper.
2. Each end of the brush has a drive wheel with a small knob sticking out. Each side of the sweeper has a plastic tab with a metal ring (grommet). The knobs fit inside these rings.
3. To remove: push one tab outward while pushing the brush toward the opposite side. The knob will slide out of the ring and you can lift the brush out.
4. To install: place the knob on one end of the new brush into one of the rings. Push the opposite tab outward and lower the other knob into that ring. Let go of the tab and the brush will snap into place.

Prefer to watch? Watch the “How to Change the Brush” video in the product photos at the top of this page. It’s near the end of the photos. Look for the image of the upside-down sweeper with the ▶ play button.

Choose Your Color

Every color is the same sweeper. They are all the same size, made of the same materials and clean the same way.

The only extra: the Gray sweeper also comes with the Vinyl Blade Rotor in the box.

Available colors: Black, White, Gray, Mint, Pink, Purple, Red, Gold, Blue, Silver and Peach

What's in the Box

All colors except Gray:

• Sweeper base
• Natural horsehair roller brush
• 4-piece handle (you put the pieces together)
• Roller cleaning tool (for removing hair and debris from the brush)

Gray sweeper:

• Sweeper base
• Natural horsehair roller brush
• Fuller Vinyl Blade Rotor (second, interchangeable roller brush)
• 4-piece handle (you put the pieces together)
• Roller cleaning tool (for removing hair and debris from the brush)

Product Details

• Size: 7 x 9.5 inches
• Weight: less than 3 pounds
• Height of sweeper base: 2-3/8 inches
• Total height with handle: 45 inches
• Handle: 4 pieces that fit together
• Materials: metal body and handle, natural horsehair roller brush
• Power: none. It works by hand, with no cord, batteries or motor
• Warranty: risk-free 3-year USA limited warranty
• Made: designed in the USA, made in China to Fuller Brush specifications

Push the sweeper back and forth over carpet or hard flooring — the rolling brushes build an electrostatic charge that lifts dust, crumbs, and pet hair as you go.

When you're done, hold the sweeper over a trash can and press the release button on the ends of the dual dust bins to empty them.

Use the included cleaning comb to clear any hair wrapped around the bristle brushes so the sweeper keeps working at full strength.

Works best on low-pile carpet, rugs, and smooth flooring. It is not designed for high-pile or shag carpet, or for floors with deep ridges or grooves.

How to Change the Brush
1. Turn the sweeper upside down on a firm, flat surface. The brush (horsehair or vinyl) sits in the middle of the sweeper.
2. Each end of the brush has a drive wheel with a small knob sticking out. Each side of the sweeper has a plastic tab with a metal ring (grommet). The knobs fit inside these rings.
3. To remove: push one tab outward while pushing the brush toward the opposite side. The knob will slide out of the ring and you can lift the brush out.
4. To install: place the knob on one end of the new brush into one of the rings. Push the opposite tab outward and lower the other knob into that ring. Let go of the tab and the brush will snap into place.
Prefer to watch? Watch the "How to Change the Brush" video in the product photos at the top of this page. It's near the end of the photos. Look for the image of the upside-down sweeper with the play button.